3 Nov
2021
Standards Specifications
- Tri-axle body
- Anodized aluminium roll-up doors
- Stylish monocoque corrosion resistant composite storage cabinets 56″ tunnel box
- Air actuated sliding/rotating locks
- Electronic self-leveling and anti-twist device
- Scale system
- 7” color touch screen
- Retractable main control station with fully proportional paddle style controls
- Alternate emergency manuals controls
- Vehicle display controller (vdc) mounted on control panel
- Fully proportional remote control with 2 batteries and charger
- 8 button can bus keypad in the cab for lighting control
- Electronic door locks
- Door activated led compartment lighting
- Quick disconnect underlift hydraulic connector
- Emergency stop switches
- High pressure hydraulic filter
- Threaded lubrification fittings on all moving part
General Specifications
- 85-Ton hydraulic sliding-rotating wrecker boom
- 60-Ton safe lifting capacity ( with 25% safety factor)
- 360° Continuous Rotation
- Low profile 3-stage front and rear outriggers
- Average body weight : 62,000 lbs
- 101,5” wide heavy duty body
- V-shaped 3-stage telescopic boom
- Boom structural rating fully retracted: 170,000 lbs (85t SAE J2512)
- Reach past tailgate : 467″
- Maximum Boom working height: 663″
- Boom range of elevation: 0-70°
- 360° sheave head
- D-rings on each boom section
- Dual 60,000 lbs 2-speed planetary winches
- Wire ropes: 7/8″ x 200′
- Air tensioners
- Air free spool
- Optional: dual 25,000 lbs planetary auxiliary winches under the boom – 5/8” x 200′ wire ropes
- Optional: 50,000 lbs planetary sliding drag winch – 3/4” x 360′ wire rope
Chassis information
- Kenworth W900B
Options
| ITEM | DESCRIPTON | QTY |
| C-CSR85CSR85 | CSR85 recovery equipment wrecker – composite/slider/rotator | 1 |
| C-ER037 | Full control on both side | 1 |
| C-NC117 | Standard paddle controls | 1 |
| C-NC67 | Standard tri-axle body for csr | 1 |
| C-12V | 12v wiring | 1 |
| C-C02 | Composite winch covers | 1 |
| C-NC94 | New style hooking attachment for underlift | 1 |
| C-T95 | 2 auxiliary dp 25,000 lbs planetary winches 5/8” x 200′ wire rope | 1 |
| C-CA78 | 7/8″ dyneema 12-strand synth. Ropes w/ 10t yoke self locking hook | 1 |
| C-CA58 | 5/8″ dyneema 12-strand synth. Ropes w/ 6.7t yoke self locking hook | 1 |
| C-Z902 | Sliding-drag winch – 50,000lbs (222kn) 3/4″ x 360′ wire rope (mounted on the mast) | 1 |
| C-CA34D | 3/4″ x 360′ dyneema 12-strand synth. Ropes w/ 10t yoke self locking hook | 1 |
| C-C22 | 72″ tunnel tool box | 1 |
| C-C07 | Battery box on top of the tunnel tool box | 1 |
| C-CT2 | 1 shelving in tunnel tool box | 1 |
| C-CW | Wil-burt light tower provision | 1 |
| C-NC68 | Flat bottom tunnel box (over the chassis) | 1 |
| C-A64 | Extruded aluminium panel in driver side (l) front large tool box (double door/roll-up) | 1 |
| C-ER08 | Tool box with drawers in passenger side (rh) large tool box (double door/-roll-up) | 1 |
| C-NC86 | T-bar 4″x 4″ [102mm x 102mm] | 1 |
| C-L052C-E | Axle-lift shd – 4 stage short – t-bar 4×4 [ref=sshd4-4] | 1 |
| C-Z826 | Double swivel receiver adators (t-bar 4×4) | 1 |
| C-Z828 | Pintle hook/gooseneck/ fifth wheel adapter mounted on swivel receiver (pintle hook, gooseneck attachment or fifth wheel attachment not included) | 1 |
| C-Z803 | Fifth wheel attachment ( to be mount on c-z828 not included) | 1 |
| C-Z829 | Gooseneck attachment (to be mount on c-z828 not included) | 1 |
| C-Z702 | Short back axle fork (w=5-5/8″;h=3-1/4″;centered) | 1 |
| C-Z650 | Frame fork (w=3-1/8″;h=9-3/16″;offset) | 1 |
| C-Z651 | Short front axle fork (w=1-3/4″;h=2″;centered) | 1 |
| C-Z660 | Short fork (w=4-1/16″;h=4-1/4″; 0,5″ offset) | 1 |
| C-Z813 | Tow eye bus axle fork | 1 |
| C-Z825 | U bolt adaptors | 1 |
| C-Z3 | Shackle holders (5 pins) | 1 |
| C-Z4 | Ketcher hook support assembly | 1 |
| C-Z7 | Snatch block holder (6) | 1 |
| C-Z9 | Snatch block holder (4) | 1 |
| C-Z18 | Single hook holder | 1 |
| C-Z22 | Tooloks (1003) | 1 |
| C-R29 | Ketcher hook (for new lock) | 1 |
| C-R26 | One short spreader bar | 1 |
| C-R50 | Lift triangle with choker | 1 |
| C-K06 | Heavy rotator -40cs 50cs accessories kit | 1 |
| C-NC128 | Install def tank left side under tunnel tool box | 1 |
| C-NC114 | Install storage bracket mount | 1 |
| C-ER05-4 | Add a whelen t-series ion strobe on the top corners of truck grid (2 total) | 1 |
| C-ER05-4 | Add a whelen t-series ion strobe on the bottom corners of truck grid (2 total) | 1 |
| C-R321 | Automatic transmission pto extra (for 30 tons and more) | 1 |
| C-NC136 | Black painted mounting plates | 1 |
| C-LS034 | Extra marker lights option | 1 |
| C-ER07 | Universal led flasher outlet on all side marker lights | 1 |
| C-L115 | Lumabar lights outside tunnel tool box (cs+csr) | 1 |
| C-L123 | Perimeter enhancement light, super-led, steady white (4 total) | 1 |
| C-ER05 | Strobes in rear tail lights (one on each side) | 1 |
| C-L106 | Work light on each side of the axle-lift | 1 |
| C-L133 | 2 flexible light position on each side of the side composite | 1 |
| C-S074I | Stainless on winch covers (installed) | 1 |
| C-S099I | Stainless underneath marker lights (installed) | 1 |
| C-ER034-2 | 48″ wireless round strobe tow light with braket and charger/transmitter outlet / lithium battery | 1 |
| C-REM01 | Yellow maxi linear 8 w/color display scanreco | 1 |
| C-ER02 | 2 led work lights on the cylindre attachement | 1 |
| C-ER02 | 2 led work lights under the aux winch sheaves | 1 |
| C-L200 | Led work light on sheave heads [option c-er11 or c-er12 required for cs] | 1 |
| C-LO6 | Wireless remote control lodar 6 buttons | 1 |
| C-C068 | Stabilized grips for outrigger for side-pulling (2) | 1 |
| C-C073 | Double spreader bar holder | 1 |
| C-C076 | Madisson grips set for csr outrigger (4x) | 1 |
| C-ER04-2 | Winch camera with screen | 1 |
| C-L20-1 | Scanreco lo-cator & ip transmitters with led and buzzer | 1 |
| C-GR01 | Lube electric grease pump on the slide | 1 |
| C-ST01 | Remote control holder installed on the horizontal door | 1 |
| C-ER04-1 | Back-up camera without screen (truck kenworth / peterbilt / kit paccar) (screen prog. Not included) | 1 |
| C-L20 | Lodar lo-cator for standard & ip transmitters with led and buzzer | 1 |
| C-SPECDATE | Please specify the truck-built date (or truck availability) | 1 |
| C-M054 | Installation | 1 |
| C-PCG4-3 | One color paint – base/clear | 1 |
| C-PC-AX | All paint codes supplied are axalta imron codes and i do not request any paint sample sent out for proofing. Nrc will use the provided codes without any further validation. | 1 |
| C-PCS5 | Add a second paint color | 1 |
| C-PCS5 | Add a third paint color | 1 |
| C-PCS7 | Paint on 4 roll-up doors | 1 |
| C-P-SIMARD14 | Simard ams40tp front tandem steer conversion – wheels, tires & axle supplied w/ chassis. | 1 |
Configurator Options
| Configuration Notes | |
| QUESTION | NOTE |
| Please indicate your front axle configuration | Tandem steer axle |
| Please specify pump rotation | Clockwise (generally used for automatic transmission please verify your truck specification) |
| Autorisation to use pictures of this equipment | The customer allows nrc to use, display, or publish pictures of his equipement |
| Truck’s built date estimated | 2021-04-12 |
| Truck frame height | 41″ |
| Vertical height from top of frame rails to top of cab | 67″ [170cm]-vertical height from top of frame rails to top of cab |
| Front spread | 115″ |
| Wheel base | 368″ |
| Please write the truck “cla” (cab to rearmost axle) | 299″ |
| Make of truck | Kenworth |
| Truck model | W900b |
| Paint code #1 | L0006eg |
| Reference for paint code 1 | Axalta |
| Color #1 description (for verification only) (ex:orange) | White |
| Paint code #2 | 570044ef |
| Reference for paint code 2 | Axalta |
| Color #2 description (for verificationl only) (ex:orange) | Hertz yellow |
| Paint code #3 | L0228eb |
| Reference for paint code 3 | Axalta |
| Color #3 description (for verificationl only) (ex:orange) | Med rich blue |
| Paint code for the body | L0006eg | axalta | white |
| Paint code for the drag winch | 570044ef | axalta | hertz yellow |
| Paint code for tail light housing | L0006eg | axalta | white |
| Paint code for base of boom | L0006eg | axalta | white |
| Paint code for the ouside part of the boom | L0006eg | axalta | white |
| Paint code for inside parts of the boom | 570044ef | axalta | hertz yellow |
| Paint code for boom elevation cylinder | L0006eg | axalta | white |
| Paint code for the winch cover | L0006eg | axalta | white |
| Paint code for light receptacles in winch cover | L0006eg | axalta | white |
| Paint code for outside parts of the wheel lift | L0228eb | axalta | med rich blue |
| Paint code for inside parts of the wheel lift | L0228eb | axalta | med rich blue |
| Paint code for the external outriggers | L0006eg | axalta | white |
| Paint code for the inner outriggers | 570044ef | axalta | hertz yellow |