7 Nov
2022
CHASSIS SPECIFICATIONS
2023 Western Star 49X SBA 6×4
40in High roof sleeper
GVWR 62,000lbs
Double frame rails
Detroit DD16 560hp / 1800lb-ft
Detroit DT12 12-speed manual automated transmission
Front axle 16,000lbs w/ 385/65r22.5 tires
Rear tandem axle 46,000lbs w/ 315/80r22.5
STANDARDS SPECIFICATIONS
Detachable from tractor in minutes
Dual cylinders for underlift elevation
Hydraulic underlift (stinger) extension
Hydraulic actuated tilt boom
Hydraulic fold
Front receiver (permanently mounted on chassis)
Removable front stands
Safety chain pockets
Aluminum fenders
Federal standard #108 compliant light group
FRAME SPECIFICATIONS
Front Axle: Minimum 12,000 lbs capacity
Rear Axle: Minimum 40,000 lbs capacity
Quickswap w/ HD underlift
Minimum wheelbase: 250″
Minimum frame RBM: 2,500,000lbs-in per rail
Quickswap w/ HDE3 and all SHD underlifts
Minimum wheelbase: 275″
Minimum frame RBM: 2,925,000lbs-in per rail
| ITEM | DESCRIPTION | QTY |
| C-QSQS | QUICK-SWAP UNDER LIFT | 1.00 |
| C-NC86 | T-BAR 4″X 4″ [102MM X 102MM] | 1.00 |
| ITEM | DESCRIPTION | QTY |
| C-L033-R | UPGRADE TO EURO AXLE-LIFT HD – 3 STAGE – T-BAR 4X4 [REF=HDE3-4] | 1.00 |
| C-Z706 | STANDARD ADAPTORS (T-BAR 4X4) | 1.00 |
| C-Z440 | SPRING BRACKET (5″ WIDE) | 1.00 |
| C-Z828 | PINTLE HOOK/GOOSENECK/ FIFTH WHEEL ADAPTER MOUNTED ON SWIVEL RECEIVER (PINTLE HOOK, GOOSENECK ATTACHMENT OR FIFTH WHEEL ATTACHMENT NOT INCLUDED) | 1.00 |
| C-Z803 | FIFTH WHEEL ATTACHMENT ( TO BE MOUNT ON C-Z828 NOT INCLUDED) | 1.00 |
| C-Z829 | GOOSENECK ATTACHMENT (TO BE MOUNT ON C-Z828 NOT INCLUDED) | 1.00 |
| C-Z830 | KING PIN ATTACHMENT (TO BE MOUNT ON C-Z828 NOT INCLUDED) | 1.00 |
| C-Z804 | CHAIN FORK (SET) | 1.00 |
| C-Z650 | FRAME FORK (W=3-1/8″;H=9-3/16″;OFFSET) | 1.00 |
| C-Z651 | SHORT FRONT AXLE FORK (W=1-3/4″;H=2″;CENTERED) | 1.00 |
| C-Z640 | HIGH FORK (W=4-1/2″;H=14;CENTERED) | 1.00 |
| C-Z660 | SHORT FORK (W=4-1/16″;H=4-1/4″; 0,5″ OFFSET) | 1.00 |
| C-Z810 | STEP UP 8″ FOR SWIVEL RECEIVER | 1.00 |
| C-Z825 | U BOLT ADAPTORS | 1.00 |
| C-Z571 | BRACKET PINTLE HOOK IN VERTICAL SECTION | 1.00 |
| C-Z572 | ACCESSORY BRACKET HITCH IN VERTICAL SECTION | 1.00 |
| C-C077 | REAR JACK LEGS QS | 1.00 |
| C-12V | 12V WIRING | 1.00 |
| C-T88-2 | RAMSEY 25,000 LBS PLANETARY (2 SPEED) WINCH WITH RECOVERY DIRECTIONAL | 1.00 |
| C-C191 | 60″ TUNNEL TOOL BOX | 1.00 |
| C-RL | REPLACE TUNNEL TOOL BOX DOORS BY ROLL-UP DOORS (COME WITH LUMABAR LIGHT) | 1.00 |
| C-CT2 | 1 SHELVING IN TUNNEL TOOL BOX | 1.00 |
| C-C072 | CHAIN STORAGE CAROUSEL | 1.00 |
| C-NC52 | INSTALL CHAIN STORAGE CAROUSEL RIGHT SIDE FRONT WALL OF TUNNEL TOOL BOX | 1.00 |
| C-S112 | COMPOSITE LIGHT PYLON | 1.00 |
| C-G22 | SLIM LIGHTBAR 80” CODE 3 | 1.00 |
| C-NC17 | CLEAR MARKER LIGHT | 1.00 |
| C-L101-1 | LUMABAR LIGHTING INSIDE TUNNEL TOOL BOX | 1.00 |
| C-L112-1 | 2 LED WORK LIGHTS ON TOP OF THE REAR BUMPER | 1.00 |
| C-ER034 | 48″ WIRELESS ROUND STROBE TOW LIGHT WITH BRAKET AND CHARGER/TRANSMITTER OUTLET | 1.00 |
| C-L3 | TRANSMITTER TOW LIGHT IN BUMPER DEUTCH | 1.00 |
| C-LS030 | LIGHTS ON THE TOP OF TUNNEL TOOL BOX DOUBLE DOOR ( EXTRA MARKER LIGHT) ON EACH SIDE | 1.00 |
| C-C58 | 5/8″ X 200′ STEEL WIRE ROPE WITH SWIVEL HOOK | 1.00 |
| C-R01 | OIL TANK WITH FILTER | 1.00 |
| C-P44 | PUMP 17 GPM | 1.00 |
| C-PTO1 | PTO (APPROXIMATELY) | 1.00 |
| C-M03W | INSTALLATION OF “WET KIT” + Q.S. ON CHASSIS | 1.00 |
| C-NC151 | CHASSIS DELIVERED AT NRC FACTORY BY OEM/DEALER/ CUST | 1.00 |
| C-NC153 | DEALER PICK UP – FCA NRC FACTORY – NO PDI / NO HANDOVER | 1.00 |
| ITEM | DESCRIPTION | QTY | |
| C-ER05-4 | ADD A WHELEN T-SERIES ION STROBE ON THE TOP CORNERS OF TRUCK GRID (2 TOTAL) | 1.00 | |
| C-ER05-4 | ADD A WHELEN T-SERIES ION STROBE ON THE BOTTOM CORNERS OF TRUCK GRID (2 TOTAL) | 1.00 | |
| C-LO6 | WIRELESS REMOTE CONTROL LODAR 6 BUTTONS | 1.00 | |
| C-C33-RL-C | LARGE TOOL BOX 72″ ROOL-UP DOORS WITH CONTROL INSIDE THE BOX ON THE DRIVER SIDE | 1.00 | |
| C-C33-RL | 72″ STEEL TOOL BOX WITH ROLL UP DOOR (Q.S) (PASSENGER SIDE) | 1.00 | |
| C-NC155 | CLEAR ANODIZED ALUMINUM – STD ON ROLL-UP DOORS ON 72″ TOOL BOX STEEL (DRIVER SIDE) | 1.00 | |
| C-NC155 | CLEAR ANODIZED ALUMINUM – STD ON ROLL-UP DOORS ON 72″ TOOL BOX STEEL (PASSENGER SIDE) | 1.00 | |
| C-L113 | 2 LIGHTING FOR 72″ PAINTED STEEL TOOLBOX, ROLL-UP DOOR (PASSENGER SIDE) | 1.00 | |
| C-L113 | 2 LIGHTING FOR 72″ PAINTED STEEL TOOLBOX, ROLL-UP DOOR (DRIVER SIDE) | 1.00 | |
| C-EX1 | ALUMINUM PANEL EXTRUDED IN 72″ TOOLBOX (DRIVER SIDE) | 1.00 | |
| C-T72 | FULL SHELF FOR 72″ X 25″ X 21″ – 1/8″ STEEL TOOLBOX PAINT, ROLL-UP DOORS (PASSENGER SIDE) | 1.00 | |
| C-P-0 | NO NEW CUSTOM REQUEST | 1.00 | |
| C-NONE | [CUSTOM] – NO CUSTOM ITEM OF THIS LIST | 1.00 | |
| C-PQS4 | ONE COLOR PAINT – SINGLE STAGE | 1.00 | |
| C-PQS2 | ONE COLOR PAINT – SINGLE/ STAGE – TUNNEL TOOL BOX | 1.00 | |
| C-PT01 | COLOR PAINT FOR 72″ TOOLBOX (PASSENGER SIDE) | 1.00 | |
| C-PT01 | COLOR PAINT FOR 72″ TOOLBOX (DRIVER SIDE) | 1.00 | |
| C-PCS5 | ADD A SECOND PAINT COLOR | 1.00 | |
| C-PC-AX | ALL PAINT CODES SUPPLIED ARE AXALTA IMRON CODES AND I DO NOT REQUEST ANY PAINT SAMPLE SENT OUT FOR PROOFING. NRC WILL USE THE PROVIDED CODES WITHOUT ANY FURTHER VALIDATION. | 1.00 | |
| C-SPECDATE | PLEASE SPECIFY THE TRUCK BUILT DATE (OR TRUCK AVAILABILITY) | 1.00 |