CHASSIS INFORMATION
2023 Kenworth W900 10 x 4
GVWR 104,000lbs
Triple frame rails w/ 5.850,000lbs-in rbm per side
Cummins x15 565hp / 1580lb-ft
Allison 4500RDS 6-spd automatic transmission
Front tandem axles (2) 20,000lbs w/ 385/65r22.5 tires
Liftable axle 20,000lbs w/ 315/80r22.5
Rear tandem axle 52,000lbs w/ 315/80r22.5
STANDARDS SPECIFICATIONS
Tri-axle body
Anodized aluminium roll-up doors
Stylish monocoque corrosion resistant composite storage cabinets
56″ tunnel box
Air actuated sliding/rotating locks
Lock & safety valve on elevation and extension cylinders
Electronic self-leveling and anti-twist device
Scale system
7” color touch screen
Ergonomic main control station with fully proportional paddle style controls
Alternate emergency manuals controls
Vehicle display controller (vdc) mounted on control panel
Fully proportional remote control with 2 batteries and charger
8 button can bus keypad in the cab for lighting control
Electronic door locks
Door activated led compartment lighting
Quick disconnect underlift hydraulic connector
Emergency stop switches
High pressure hydraulic filter
Threaded lubrication fittings on all moving part
GENERAL SPECIFICATIONS
85-Ton hydraulic sliding-rotating wrecker boom
60-Ton safe lifting capacity (with 25% safety factor)
360° Continuous Rotation
Low profile 3-stage front and rear outriggers
Average body weight : 62,000 lbs
101,5” wide heavy duty body
V-shaped 3-stage telescopic boom
Boom structural rating fully retracted: 170,000 lbs (85t SAE J2512)
Reach past tailgate : 467″
Maximum Boom working height: 663″
Boom range of elevation: 0-70°
360° sheave head
D-rings on each boom section
Dual 60,000 lbs 2-speed planetary winches
Wire ropes: 7/8″ x 200′
Air tensioners
Air free spool
Optional: dual 25,000 lbs planetary auxiliary winches under the boom – 5/8” x 200′ wire ropes
Optional: 50,000 lbs planetary sliding drag winch – 3/4” x 360′ wire rope
FRAME SPECIFICATIONS
Front axle: Minimum 40,000 lbs capacity
Rear axles: Minimum 66,000 lbs capacity
Minimum CLA: 281″ (from cab to center of rearmost axle)
Minimum frame RBM: 5,500,000 in.lbs
ITEM | DESCRIPTION | QTY |
C-CSR85 | CSR85 RECOVERY EQUIPMENT WRECKER – COMPOSITE/SLIDER/ROTATOR | 1.00 |
C-ER037 | FULL CONTROL ON BOTH SIDE | 1.00 |
C-NC117 | STANDARD PADDLE CONTROLS | 1.00 |
C-NC67 | STANDARD TRI-AXLE BODY FOR CSR | 1.00 |
C-12V | 12V WIRING | 1.00 |
C-C02 | COMPOSITE WINCH COVERS | 1.00 |
C-NC94 | NEW STYLE HOOKING ATTACHMENT FOR UNDERLIFT | 1.00 |
C-T95 | 2 AUXILIARY DP 25,000 LBS PLANETARY WINCHES 5/8” X 200′ WIRE ROPE | 1.00 |
C-CA78-S | 7/8″ DYNEEMA 12-STRAND SYNTH. ROPES WITH SELF-LOCKING HOOKS | 1.00 |
C-CA58-W-S | 5/8″ DYNEEMA 12-STRAND SYNTH. ROPES WITH SELF-LOCKING HOOKS | 1.00 |
C-Z902 | SLIDING-DRAG WINCH – 50,000LBS (222KN) 3/4″ X 360′ WIRE ROPE (MOUNTED ON THE MAST) | 1.00 |
C-CA34D | 3/4″ X 360 DYNEEMA 12-STRAND SYNTH. ROPES WITH SHACKLES | 1.00 |
C-G24 | SLIM LIGHTBAR 91” CODE 3 – ON THE TOP OF CABLE GUIDE | 1.00 |
C-C22 | 72″ TUNNEL TOOL BOX | 1.00 |
C-C07 | BATTERY BOX ON TOP OF THE TUNNEL TOOL BOX | 1.00 |
C-CT2 | 1 SHELVING IN TUNNEL TOOL BOX | 1.00 |
C-CW | WIL-BURT LIGHT TOWER PROVISION | 1.00 |
C-A61 | ALUMINUM CHECKER PLATE ON TOP OF TUNNEL TOOL BOX (INSTALLED) | 1.00 |
ITEM | DESCRIPTION | QTY |
C-NC68 | FLAT BOTTOM TUNNEL BOX (OVER THE CHASSIS) | 1.00 |
C-ER08 | TOOL BOX WITH DRAWERS IN DRIVER SIDE (LH) FRONT LARGE TOOL BOX (DOUBLE DOOR/ROLL- UP) | 1.00 |
C-A64 | EXTRUDED ALUMINIUM PANELS IN PASSENGER SIDE (RH) LARGE TOOL BOX (DOUBLE DOOR) | 1.00 |
C-NC86 | T-BAR 4″X 4″ [102MM X 102MM] | 1.00 |
C-L042-E | EURO AXLE-LIFT SHD -3 STAGE LONG- T-BAR 4X4 [REF=LSHDE3-4] | 1.00 |
C-Z826 | DOUBLE SWIVEL RECEIVER ADATORS (T-BAR 4X4) | 1.00 |
C-Z828 | PINTLE HOOK/GOOSENECK/ FIFTH WHEEL ADAPTER MOUNTED ON SWIVEL RECEIVER (PINTLE HOOK, GOOSENECK ATTACHMENT OR FIFTH WHEEL ATTACHMENT NOT INCLUDED) | 1.00 |
C-Z1 | SIDE PULL SPADES STORAGE HOLDER | 2.00 |
C-Z3 | SHACKLE HOLDERS (5 PINS) | 1.00 |
C-Z4 | KETCHER HOOK SUPPORT ASSEMBLY | 1.00 |
C-Z7 | SNATCH BLOCK HOLDER (6) | 1.00 |
C-Z9 | SNATCH BLOCK HOLDER (4) | 1.00 |
C-Z18 | SINGLE HOOK HOLDER | 8.00 |
C-R29 | KETCHER HOOK (FOR NEW LOCK) | 1.00 |
C-R26 | ONE SHORT SPREADER BAR | 2.00 |
C-R50 | LIFT TRIANGLE WITH CHOKER | 2.00 |
C-K06 | HEAVY ROTATOR -40CS 50CS ACCESSORIES KIT | 1.00 |
C-K08 | SNATCH BLOCK 8 TON W 8″ SHEAVE- WIRE 5/8″-3/4″ (REF 1568224) | 4.00 |
C-M054 | INSTALLATION | 1.00 |
C-NC128 | UNDER TUNNEL TOOL BOX – INSTALL DEF TANK LEFT SIDE | 1.00 |
C-NC118 | DO NOT INSTAL THE STORAGE BRACKET MOUNT | 1.00 |
C-ER05-4 | ADD A WHELEN T-SERIES ION STROBE ON THE TOP CORNERS OF TRUCK GRID (2 TOTAL) | 1.00 |
C-ER05-4 | ADD A WHELEN T-SERIES ION STROBE ON THE BOTTOM CORNERS OF TRUCK GRID (2 TOTAL) | 1.00 |
C-R321 | AUTOMATIC TRANSMISSION PTO EXTRA (FOR 30 TONS AND MORE) | 1.00 |
C-CH40T | OIL HEATER – TANK ONLY | 1.00 |
C-LS034 | EXTRA MARKER LIGHTS OPTION | 1.00 |
C-ER07 | UNIVERSAL LED FLASHER OUTLET ON ALL SIDE MARKER LIGHTS ( SIDE BODY,LIGHT BAR,WINCH COVER) | 1.00 |
C-L123 | PERIMETER ENHANCEMENT LIGHT, SUPER-LED, STEADY WHITE (4 TOTAL) | 1.00 |
C-ER05 | STROBES IN REAR TAIL LIGHTS (ONE ON EACH SIDE) | 1.00 |
C-L106 | WORK LIGHT ON EACH SIDE OF THE AXLE-LIFT EURO | 1.00 |
C-L121 | 3 LIGHTS BETWEEN THE WINCH COVER | 1.00 |
C-L133 | 2 FLEXIBLE LIGHT POSITION ON EACH SIDE OF THE SIDE COMPOSITE | 1.00 |
C-S074I | STAINLESS ON WINCH COVERS (INSTALLED) | 1.00 |
C-S062-1I | STAINLESS ON MAST (INSTALLED) | 1.00 |
C-S099I | STAINLESS UNDERNEATH MARKER LIGHTS (INSTALLED) | 1.00 |
C-REM01 | YELLOW MAXI LINEAR 8 W/COLOR DISPLAY SCANRECO | 1.00 |
C-ER02 | 2 LED WORK LIGHTS ON THE CYLINDRE ATTACHEMENT | 1.00 |
C-ER02-4 | 2 RECTANGULAR LED SCENE LIGHTS UNDER THE BOOM | 1.00 |
ITEM | DESCRIPTION | QTY |
C-L200 | LED WORK LIGHT ON SHEAVE HEADS [OPTION C-ER11 OR C-ER12 REQUIRED FOR CS] | 1.00 |
C-LO6 | WIRELESS REMOTE CONTROL LODAR 6 BUTTONS | 1.00 |
C-C068 | STABILIZED GRIPS FOR OUTRIGGER FOR SIDE-PULLING (2) | 1.00 |
C-C073 | DOUBLE SPREADER BAR HOLDER | 1.00 |
C-C076 | MADISSON GRIPS SET FOR CSR OUTRIGGER (4X) | 1.00 |
C-ER04-2 | WINCH CAMERA WITH SCREEN | 1.00 |
C-L20-1 | SCANRECO LO-CATOR & IP TRANSMITTERS WITH LED AND BUZZER | 1.00 |
C-GR01 | LUBE ELECTRIC GREASE PUMP ON THE SLIDE | 1.00 |
C-ST01 | REMOTE CONTROL HOLDER INSTALLED ON THE HORIZONTAL DOOR | 1.00 |
C-U05 | 2 STAINLESS FENDERETTE | 1.00 |
C-G03 | BALLISTIC NYLON PROTECTION SLEEVE FOR SYNTH. ROPES Ø1’’ (PRICE PER FT) | 20.00 |
C-ER04-1 | BACK-UP CAMERA WITHOUT SCREEN (TRUCK KENWORTH / PETERBILT / KIT PACCAR) (SCREEN PROG. NOT INCLUDED) | 1.00 |
C-L20 | LODAR LO-CATOR FOR STANDARD & IP TRANSMITTERS WITH LED AND BUZZER | 1.00 |
C-PCG4-3 | ONE COLOR PAINT – BASE/CLEAR | 1.00 |
C-PC-NAX | I PROVIDE NON-AXALTA PAINT CODES AND/OR I REQUEST PAINTS SAMPLES TO BE SENT OUT. NRC WILL PROVIDE XREF AXALTA CODES AND SEND SAMPLE BY COURIER FOR APPROVAL PRIOR TO PRODUCTION | 1.00 |
C-PCS5 | ADD A SECOND PAINT COLOR | 1.00 |
C-PCS8-CT | PAINT ON 2 ROLL-UP DOORS ON BODY AND 2 ROLLP-UP DOORS TUNNEL TOOL BOX | 1.00 |
C-NC136 | BLACK PAINTED MOUNTING PLATES | 1.00 |
C-P-0 | [CUSTOM] – REVERSE BOOM UP/DN & BOOM IN/OUT CONTROLS TO BOOM DN/UP & BOOM OUT/IN (OPTION C-P-750 REQUIRED) | 1.00 |
C-P-0 | [CUSTOM] – REVERSE AXLE-LIFT IN/OUT & FOLD UP/DN CONTROLS TO AXLE-LIFT OUT/IN & FOLD DN/UP (OPTION C-P-750 REQUIRED) | 1.00 |
C-P-1000 | [CUSTOM] – RELOCATE DEF TANK | 1.00 |
C-P-0 | [CUSTOM] – REVERSE WINCHES IN/OUT CONTROLS TO WINCHES OUT/IN (OPTION C-P-750 REQUIRED) | 1.00 |
C-P-750 | [CUSTOM] – SPECIAL ORDER FOR A CUSTOM CONTROL PANEL (MUST BE SELECTED WITH REVERSED FUNCTIONS) | 1.00 |
C-P-SIMARD19 | [CUSTOM] – SIMARD AMS40TP FRONT TANDEM STEER CONVERSION – OEM SUPPLIED AXLE- WHEELS-TIR | 1.00 |
C-SPECDATE | PLEASE SPECIFY THE TRUCK BUILT DATE (OR TRUCK AVAILABILITY) | 1.00 |