CHASSIS INFORMATION
2023 Western Star 49X SBA 6×4
GVWR 55,660lbs
Single 7/16’’ x 3 3/8’’ x 11 3/8’’ frame rails
Detroit DD13 450hp / 1650lb-ft
Allison 4500RDS 6-spd automatic transmission
Front axle 15,660lbs w/ 305/70r22.5 20-ply low pro tires
Rear tandem axle 40,000lbs w/ 255/70r22.5 16-ply low pro tires
STANDARDS SPECIDFICATIONS
Fixed Headboard With Chain Rack
Deck Lights
Hydraulic Gear Pump
Direct Mount – 17 Gpm [65 L/Min]
Hydraulic Oil Tank With Filter – 12 Gal [45 L]
Winch Embedded In Chain Rack
Dual Controls – Lever Type
Shock/Rust Resistant Polymer Control Boxes
Independent Hydraulic Tow Bar
Wired Tow Lights
Air Actuated Winch Free Spool
GENERAL SPECIFICATIONS
Nominal deck rating: 40,000 lbs [18,000 kg] (Evenly Distributed Load)
Tow bar lift rating: 20,000 lbs@0” / 10,000 lbs@58” [9,000 kg@0 m / 4,500 kg@1,5m]
Tow rating: 50,000lbs [22,750 kg]
Deck length: 24′-30′
Operating pressure: 2 800 psi [193 Bars]
ITEM | DESCRIPTION | QTY |
C-NC21NC21 | 40 000 TB | 1.00 |
C-4028 | 28′-40 000-TB | 1.00 |
C-NC46 | COMPLETE EQUIPMENT | 1.00 |
C-D415 | 5 CHAIN SLOTS PER SIDE (18 TOTAL FOR 24′ 25′, 26′, 27′, 28′, 29′, 30′) (NC) | 1.00 |
C-D0 | 1/4″ STEEL CHECKER PLATE (STANDARD FOR 40 000-TB) | 1.00 |
C-PGAL-2 | DECK GALVANIZED (OPTION FOR 24′-30′ DECKS) | 1.00 |
C-DISCLAIMER | CUSTOMER, FINAL PURCHASER OR END USER HAS BEEN INFORMED OF THE RISKS AND BENEFITS OF HOT DIP GALVANIZING (HDG) OF HIS NRC CAR CARRIER DECK | 1.00 |
C-C3 | FLAT TOP DECK WITH STAKE POCKET, WITHOUT REMOVABLE RAILS | 1.00 |
C-B3S | 3″ HIGH X 9″ SPACING (STANDARD FOR 30 000-TB AND 40 000-TB) | 1.00 |
C-L16 | 5 MARKER LIGHTS PER SIDE | 1.00 |
C-Z01 | L/H SIDE UNDERDECK TIE DOWN FLAT | 1.00 |
C-Z01 | R/H SIDE UNDERDECK TIE DOWN FLAT | 1.00 |
C-T05-1 | DP 20,000 LBS (OPTION 2 SPEED) WITH 5/8″ WIRE ROPE (OPTION FOR 40 000-TB) | 1.00 |
C-NC156 | WINCH AIR FREE SPOOL ON LEFT HAND SIDE (NC) | 1.00 |
C-NC30 | 75′ STEEL WIRE ROPE (NO CHARGE) | 1.00 |
C-CR01 | SWIVEL HOOK | 1.00 |
C-ER061 | UNIVERSAL LED FLASHER OUTLET (ON DECK ONLY) | 1.00 |
C-NC25 | TANDEM AXLE | 1.00 |
C-M045 | INSTALLATION (INCLUDES PTO) | 1.00 |
C-NC151 | CHASSIS DELIVERED AT NRC FACTORY BY OEM/DEALER/ CUST | 1.00 |
C-NC153 | DEALER PICK UP – FCA NRC FACTORY – NO PDI / NO HANDOVER | 1.00 |
C-12V | 12V WIRING | 1.00 |
C-ER05-4 | ADD A WHELEN T-SERIES ION STROBE ON THE TOP CORNERS OF TRUCK GRID (2 TOTAL) | 1.00 |
C-ER05-4 | ADD A WHELEN T-SERIES ION STROBE ON THE BOTTOM CORNERS OF TRUCK GRID (2 TOTAL) | 1.00 |
C-AL | AIR LINES TO REAR USING TRUCK’S AIR SUPPLY | 1.00 |
C-R32 | AUTOMATIC TRANSMISSION PTO EXTRA | 1.00 |
C-E51 | HEAVY DUTY TOW BAR T-BAR 4″ X 4″ (STD-NC) | 1.00 |
C-G20-B | GALVANIZED SUB-FRAME WITH BLACK BUMPER | 1.00 |
C-NC17 | CLEAR MARKER LIGHT | 1.00 |
ITEM | DESCRIPTION | QTY |
C-L128-1 | 6 X SLIM LIGHT (6 RED (STOP-FLASH/ 1 BACKUP) – ON BUMPER | 1.00 |
C-NC11 | LEVER CONTROL STANDARDS | 1.00 |
C-G012 | STABILIZER GRIP (30,000 & 40,000 LBS) (4X4) | 1.00 |
C-G018 | RUBBER STABILIZER GRIP (SET) (4″ X 4″) | 1.00 |
C-L112-1 | 2 LED WORK LIGHTS ON TOP OF THE REAR BUMPER | 1.00 |
C-ER05-5 | 1 STROBES ION T-SERIE ON EACH REAR BUMPER END ( 2STROBES TOTAL) | 1.00 |
C-Z815 | CHAIN ADAPTORS (T-BAR 4X4) | 1.00 |
C-Z826 | DOUBLE SWIVEL RECEIVER ADATORS (T-BAR 4X4) | 1.00 |
C-Z804 | CHAIN FORK (SET) | 1.00 |
C-Z650 | FRAME FORK (W=3-1/8″;H=9-3/16″;OFFSET) | 1.00 |
C-Z651 | SHORT FRONT AXLE FORK (W=1-3/4″;H=2″;CENTERED) | 1.00 |
C-Z825 | U BOLT ADAPTORS | 1.00 |
C-B07 | HITCH RECEIVER ASSEMBLY 30-40 000LBS (T-BAR 4X4 || OR NO T-BAR) | 1.00 |
0596043 | TRI BALL HITCH | 1.00 |
C-A432 | TRAILER HITCH & PINTLE HOOK ADAPTOR (4 HOLES) (T-BAR 4X4) | 1.00 |
C-A433 | PINTLE HOOK 20 TON (4 HOLE) ( 40000 LBS) | 1.00 |
C-Z827 | FIFTH WHEEL BRACKET – FOR CAR CARRIER | 1.00 |
C-A1 | STANDARD CHAIN RACK | 1.00 |
C-A12 | STD WINCH EMBEDDED IN CHAIN RACK | 1.00 |
C-L128 | 8 X SLIM LIGHT (8 RED (STOP-FLASH) ON CHAIN RACK | 1.00 |
C-NC40 | CHAIN RACK NRC BLACK PAINT | 1.00 |
C-S055 | STAINLESS WITH NRC LOGO INSIDE CHAINRACK | 1.00 |
C-S055-44 | PROTECTIVE GRILL BETWEEN LIGHT PYLONS WITH EXTENSION TO EACH SIDE | 1.00 |
C-L124 | LED LIGHT BAR 21.5″ IN THE CENTER UNDER THE CHAIN RACK HEADER | 1.00 |
C-G22 | QTY (1) X 80’’ CODE 3 SLIM LIGHTBAR – AMBER | 1.00 |
C-U03-1 | 2 ROLLBACK BLACK FENDER SET FOR 22.5 TIRES (TANDEM) | 1.00 |
C-LO8P | WIRELESS REMOTE CONTROL LODAR 10 BUTTONS (WINCH, DECK & WHEEL LIFT) | 1.00 |
C-C72RL | ALUMINUM 72″ X 25″ X 21″- 1/8″ TOOL BOX ROLL-UP DOOR (DRIVER SIDE) | 1.00 |
C-C72RL | ALUMINUM 72″ X 25″ X 21″- 1/8″ TOOL BOX ROLL-UP DOOR (PASSENGER SIDE) | 1.00 |
C-C40-2 | REAR ALUMINUM TOOLBOX (DRIVER SIDE) | 1.00 |
C-C40-3 | REAR ALUMINUM TOOLBOX (PASSENGER SIDE) | 1.00 |
C-C41 | CHAIN BASKET STEEL GALVANIZED (DRIVER SIDE) | 1.00 |
C-C41 | CHAIN BASKET STEEL GALVANIZED (PASSENGER SIDE) | 1.00 |
C-L113 | 2X LIGHT H-20-12 “WHITE IN ALUMINUM 72″ X 25″ X 21″- 1/8” TOOL BOX ROLL-UP DOOR (DRIVER SIDE) | 1.00 |
C-L113 | 2X LIGHT H-20-12 “WHITE IN ALUMINUM 72″ X 25″ X 21″- 1/8” TOOL BOX ROLL-UP DOOR (PASSENGER SIDE) | 1.00 |
C-L113-2 | 1 X LIGHT H-20-12 “WHITE WITH EXTRA SUPPORT IN REAR TOOL BOX (PASSENGER SIDE) | 1.00 |
C-L113-2 | 1 X LIGHT H-20-12 “WHITE WITH EXTRA SUPPORT IN REAR TOOL BOX (DRIVER SIDE) | 1.00 |
C-S056 | STAINLESS ON SMALL GALVANISED CHAIN BOX (DRIVER SIDE) | 1.00 |
C-S056 | STAINLESS ON SMALL GALVANISED CHAIN BOX (PASSENGER SIDE) | 1.00 |