Equipment Ready To Go

Get informed about our new equipment, ready to hit the road today! It’s just out of our factory and equipped to serve the best Incident Managers.

114

2018 INTERNATIONAL 4300 WITH NRC CARRIER 20TB-22

Truck: 2018 International 4300 Engine: Cummins ISB 300hp Transmission: Automatic Allison 2500 RDS Axles: 13 000 lbs ×20 000 lbs Carrier: NRC 20TB-22′ Winch: Ramsey 8 000 lbs Galvanized subframe, deck and bumper 2X JimexToolbox 60” Wireless remote on the winch   Contact a salesrep today! 450-379-5796 Reference number: 307537  
1IMG_9896

2017 PETERBILT 337 WITH NRC CARRIER 20TB-22

Truck: 2017 Peterbilt 337 Engine: PACCAR PX-7 – 280 hp Transmission: Automatic Allison 2500 RDS Axles: 12 500 lbs ×21 000 lbs Carrier: NRC 20TB-22′ Winch: Ramsey 8 000 lbs Galvanized subframe, deck and bumper Toolbox 72” Basket 72”   Contact a salesrep today! 450-379-5796 Reference number: 307477  
DSC_1650

2017 FREIGHTLINER WITH NRC CARRIER 20TB-22

Truck: 2017 Freightliner M2-106 Xcab Engine: Cummins ISB 300HP Transmission: Automatic Allison 3000 RDS Axles: 14 000 lbs ×21 000 lbs Carrier: NRC 20TB-22′ Winch: Ramsey 8 000 lbs Galvanized subframe and deck Toolbox 72” Basket 72”   Contact a salesrep today! 450-379-5796 Reference number: 307681    
IMG_0229 (2)

T-880 KENWORTH 40” WITH NRC 40CS

Truck :T-880 Kenworth 40 Engine: 550 Cummins 20 K Front, 20 K Steerable Pusher, 46,000 Rears. Transmission: Manual 18 Speeds Wrecker: NRC 40 CS Double Frame front to back Full Lockers Winch Brake Smart Nav. 3 Stage Boom 3 Stage Long Euro Underlift 144″ of Reach. 52″ Tunnel Box New Outside cylinder design All Forks, […]
IMG_8370

HINO 195 WITH NRC CARRIER 10TB-20′-AL

Truck: 2017 Hino 195 Engine:  210 HP Transmission: Automatic Aisin A465 Axle: 7 210 lbs/ 13 660 lbs Carrier: NRC 10TB-20′ Aluminium Winch: Ramsey 8000 lbs Galvanized subframe and deck 2X Toolbox 48 Bawer Stainless” Contact a salesrep today! 450-379-5796 Reference number: 307251  
IMG_8195

Hino 258 WITH NRC CARRIER 10TB-21′

Truck: 2017 Hino 258 Engine:  260 HP Transmission: Automatic Allison 2200 RDS Axle: 8000 lbs/ 17 500 lbs Carrier: NRC 10TB-21′ Winch: Ramsey 8000 lbs Galvanized subframe, deck and rear bumper 2X Toolbox 48 Bawer Stainless”   Video: https://www.youtube.com/watch?v=rF5bit4X184   Contact a salesrep today! 450-379-5796 Reference number: 306851    
freightliner114sd2

FREIGHTLINER 114SD WITH NRC CARRIER 40TB-28′

Truck: 2017 Freightliner 114SD Engine: Detroit 450HP Transmission: Automatic Allison 4500 RDS Axles: 18k×40k Carrier: NRC 40TB-28′ Winch: DP 20,000 lbs Planetary Galvanized subframe and deck Heavy Duty Tow Bar Wireless remote on the winch 2 x 24” Federal Signal LED Lightbars Toolbox 72” on L/H side Basket 72” on R/H side   Contact a […]
michael

2017 INTERNATIONAL WITH NRC 40/50SR

Truck: 2017 International HX600 Engine: Cummins Transmission: 18 speeds Wrecker: NRC 40/50SR 3 stages boom 4 winches 144” Euro under reach Proportional controls Scale system Complete fork package Spreader bars Aluminum Tool board   Complete and ready to go! Asking for $525,000 Contact New england wrecker sales  603-658-7171  
freight

FREIGHTLINER 2016 WITH NRC CARRIER 20TB-23′

Truck: 2016 Freightliner  M2106 Engine: Cummins ISL 300HP Transmission: Allison 3500RDS Axles: 12×21 Air ride Carrier: NRC 20TB, 23′ NRC wheel lift system Stationnary ligt pylon Fully galvanized subframe   Contact Charn Narang, DEL Equipment in Calgary, Cell: (403) 478-8758 or cnarang@delequipment.com
Chadwick1

PETERBILT 2016 WITH NRC CARRIER 40TB-29′

NOW AVAILABLE IN ALBERTA, CANADA Truck: 2016 Peterbilt 348 Engine:Paccar PX-9, 330hp Transmission:3500RDS Allison, automatic transmission Axles: 16×40 Carrier: NRC carrier 40TB, 29′ Winch: 25,000 lbs Worm Gear winch Stabilizer grips for tow bar Roller recovery guide 2 toolbox 72”   Contact Chadwick Marko, Cell: (403) 804-5917