25CS -KEEP ON GOING!

You need a smaller, cost-effective and powerful single axle unit, yet your contract requires a 25T rating? Then consider the 25CS! It features the proven Slider System and a stylish, long lasting Composite Body, so you benefit from the power and versatility of the larger Composite Sliders, packaged in a smaller unit that will make heads turn!

Standard Equipment

  • 73" [1,85 m] sliding boom
  • Single Ø7" bore cylinder for power boom elevation
  • Nylon slide on boom
  • Removable spades
  • Lubrication fittings on all moving parts
  • Emergency stop switches
  • Hydraulic pressure gauges
  • Light and strong composite material cabinets and panels
  • Undercoating underneath the body
  • Safety chains (2 - 1/2" x 13` grade 8)
  • Federal standard #108 compliant light group
  • 6 marker lights per side
  • Extruded aluminum modular sliding tracks in toolboxes
  • Air & Electrical hookups
  • Tailboard mounted D-rings
  • Air actuated sliding system locks
  • Lock & safety valve on elevation and extension cylinders
  • Dual Independent rear jack legs
  • Recessed underlift rails (reduce the overhang)
  • Dual hydraulic controls with lighting
  • Electronic keypad for lights and accessory controls.
  • Higher grade steel for structural parts
  • Epoxy primer
  • Rear mounted recovery anchors
  • Mud flaps
  • LED Lights
  • Chain locker
  • Modular Fork and accessories holders
  • Forward compartments

WRECKER SPECIFICATIONS

  • Capacity: 25 Tons
  • Working hydraulic pressure: 3000 PSI
  • Composite body 100'' wide (including fenders)
  • 140" CA (from cab to center of rear axle)

BOOM SPECIFICATIONS

  • Two stage boom: Standard
  • Boom structural rating fully retracted: 50,000 lbs @40°
  • Boom structural rating fully extended: 20,000 lbs @55°
  • Reach past tailgate fully extended : 167"
  • Maximum Boom working height : 272''
  • Boom range of elevation: 55°
  • 360° sheave head

WINCHES & STEEL WIRE ROPE

  • Dual 25,000 lbs planetary winches
  • Wire rope: 5/8” x 200’
  • Air tensioners
  • Air free spool
  • Optional: 2 speed winches

AL-SPECS(HD)

  • BASIC ADAPTOR - 1 SET - ALL UNDERLIFTS
  • 1 x Swivel Receivers Set
  • HD -3
  • Reach (from tailboard) fully retracted : 68" <1727 mm>
  • Reach (from tailboard) fully extended : 99,5" <2838 mm>
  • Structural rating fully retracted : 35,000 lbs <16,000 kg>
  • Structural rating fully extended : 15,000 lbs <6,800 kg>
  • HD-3 EURO
  • Reach (from tailboard) fully retracted :74.6" <1895 mm>
  • Reach (from tailboard) fully extended :144.5" <3670 mm>
  • Structural rating fully retracted : 35,000 lbs <16,000 kg>
  • Structural rating fully extended : 16,000 lbs <7,250 kg>

Minimum frame requirement

  • Front axle: 10,000 lbs minimum (12,000 lbs recommended)
  • Rear axle: 20,000 lbs minimum (23,000 lbs recommended)
  • RBM: Min. 2,750,000 in.lbs per rail
  • CA available from 140" [3,555 mm] (from cab to center of rearmost axle)
  • Call NRC for more information

Optional Equipment

  • Additional attachments
  • Tunnel tool box (28" to 72")
  • Light pylon
  • Rear work lights
  • Aluminum dress-up kit
  • Recovery straps
  • Light bar
  • Installation
  • Rear legs multi-function spades
  • Wireless remote control
  • Heavy duty tire lift
  • Battery box inside the tunnel tool box
  • Winch covers
  • Stainless dress-up kit
  • Chain package
  • Snatch blocks
  • Paint
  • Spreader bars
  • Tag axle
  • Adjustable aluminum shelves

Advantages

  • GREAT RETURN ON INVESTMENT: This affordable, light and dependable unit has a very low operating cost.
  • GREAT PERFORMANCE: The Slider System provides this unit with recovery capabilities and flexibility that are simply unmatched by others in its category. Combine the 25CS with the NRC Tag Axle and boost its towing capacity to a higher level.
  • MORE FUN: Conveniently located controls, easy access lockers and a new, interference-free, quick-latching detachable underlift turns every jobsite into a playground.

SIMILAR MODELS